IMPORTANT: Please read the entire manual before using printer modifications. Improper use can harm the user or significantly damage the equipment.
This guide provides instructions to install the TYSON Hotend. This process requires some disassembly of the Bambu printer head.
This guide provides instructions to remove the Bambu P2S heat bed and install the TYSON heated bed. This process requires heavy disassembly of the Bambu heat bed.
NOTE: Please save all the screws and pieces from the disassembly process.
Complete the Hotend and Heat Bed installation first, if you have either. Install and wire the TYSON Hat last so that the cables are not crushed.
TYSON Hat installation and wiring
NOTE: Do not pick up the printer by the two handles on the Hat.
WARNING: Never block the side fans of the TYSON Hat, and ensure that they can receive proper airflow.
The hardware instructions on this page are for P2S. For Prusa CORE One, use the Tyson HAT V2 manual for the 120 V product, including its separate software setup, warnings, and notes. For another printer, choose your model. X2D and CORE One L manuals are still pending.
Continue to Software Setup | Warnings | Notes | Troubleshooting